E-17
AUDIO IN
L
R
AUDIO OUT
L
R
COMPONENT OUT
Y
Cb
Cr
PC CONTROL
COMPONENT IN
COMPUTER IN
VIDEO IN
AUDIO IN
AUDIO OUT
S-VIDEO IN
R
Cr/Pr
Cb/Pb
Y
L
AUDIO IN
AC IN
MONITOR OUT
AUDIO IN
COMPONENT IN
Connecting Your DVD Player
Audio cable (not supplied)
Audio Equipment
You can connect your projector to a DVD player with component output or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a component video cable (RCA
⳯
3) to
connect your DVD player to the COMPONENT IN connectors on the projector.
For a DVD player without component video (Y,Cb,Cr) output, use the S-Video cable to connect the S-Video
output of the DVD player to the S-VIDEO Input of the projector.
Use an audio cable to connect the audio from your DVD player to your audio equipment (if your DVD player
has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3. Turn on the projector and DVD player.
NOTE:
Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.
DVD player
Component video RCA
⳯
3 cable
(not supplied)
Audio cable (not supplied)
2. INSTALLATION AND CONNECTIONS
