E–6
1. INTRODUCTION
Introduction to the LT150Z Projector
This section introduces you to your new LT150Z Projector and de-
scribes the features and controls.
Congratulations on Your Purchase of The LT150Z Projector
The LT150Z is one of the very best projectors available today. The
LT150Z enables you to project precise images up to 200 inches across
(measured diagonally) from your PC or Macintosh computer (desk-
top or notebook), VCR, DVD player, document camera, a laser disc
player or PC Card Viewer.
You can use the projector on a tabletop or cart, you can use the pro-
jector to project images from behind the screen, and the projector
can be permanently mounted on a ceiling*
1
. The remote control can
be used wirelessly.
Features you’ll enjoy:
• Simple set up and operation.
• A high-performance 135 watt NSH lamp.
• The supplied wireless remote control that operates the projec-
tor from the front or rear.
• The image can be projected between 30 and 200 inches (mea-
sured diagonally).
• Keystone correction allows you to correct trapezoidal distor-
tion so that the image is square.
• You can choose between video modes depending on your source:
"normal" for a typical picture, "natural" for true color repro-
duction.
• The built-in PC Card Viewer allows you to start your presenta-
tion even when a PC is not available at the site.
• The "Capture" enables you to capture the current projected im-
age.
• An image can be projected from in front or behind a screen,
and the projector can even be installed on the ceiling.
• NEC Technologies’ exclusive Advanced AccuBlend intelligent
pixel blending technology - an extremely accurate image com-
pression technology - offers a crisp image with UXGA (1600
1200) resolution*
2
.
• Supports most IBM VGA, SVGA, XGA , SXGA/UXGA(with
Advanced AccuBlend)*
2
, Macintosh, component signal (YCbCr
/ YPbPr) or any other RGB signals within a horizontal frequency
range of 15 to 100 kHz and a vertical frequency range of 50 to
120 Hz. This includes NTSC, PAL, PAL-N, PAL-M, PAL60,
SECAM and NTSC4.43 standard video signals.
NOTE:
Composite video standards are as follows:
NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL-N: TV standard used in Argentine, Paraguay and Uruguay.
PAL-M: TV standard used in Brazil.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.
• The supplied remote control can be used without a cable, and
you can even use the remote control and mouse adapter to op-
erate your PC or Macintosh mouse wirelessly from across the
room with the built-in remote mouse receiver.
• You can control the projector with a PC using the PC Control
port*3.
• USB terminal allows USB mouse operation *4.
• The contemporary cabinet design is light, compact, easy to carry,
and complements any office, boardroom or auditorium.
• Eight pointers are available for your presentation.
*1
Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order
to ensure proper operation and reduce the risk of bodily injury.
In addition, the ceiling must be strong enough to support the
projector and the installation must be in accordance with any
local building codes. Please consult your dealer for more infor-
mation.
*2 An UXGA (1600
1200) and SXGA image (1280
1024) are
displayed with NEC Technologies Advanced AccuBlend.
*3 The PC Control Utility 1.0 is required. This program is included
on the supplied CD-ROM.
*4 The USB terminal meets the USB1.1 specification and accepts
a USB mouse only.
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Take a few minutes now to review the user’s
manual. This may save you time later on. At the beginning of each
section of the manual you’ll find an overview. If the section doesn’t
apply, you can skip it.
