English
English-3
Contents
Your new NEC LCD monitor box* should contain the following:
•
LCD monitor with tilt base
•
Power Cord
•
Video Signal Cable (15-pin mini D-SUB to 15-pin mini D-SUB male)
•
Video Signal Cable (DVI-D to DVI-D)
•
Audio Cable
•
User’s Manual
•
CD-ROM
•
Base Stand
•
Cable Holder
Quick Start
To attach the Base to the LCD Stand:
1. Insert the front of the LCD stand into the holes in the front of the Base (
Figure S.1
).
2. Attach the Base to the Stand. The locking tab on the Base should fit into the hole
on the back of the Stand (
Figure S.1
).
To attach the LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2.
For the PC or MAC with DVI digital output:
Connect the DVI signal cable to
the connector of the display card in your system (
Figure A.1
).
For the PC with Analog output:
Connect the 15-pin mini D-SUB signal cable
connected with the monitor to the connector of the display card in your system
(
Figure A.2
). Tighten all screws.
For the Mac:
Connect the MultiSync Macintosh cable adapter (not included) to the
computer. Attach the 15-pin mini D-SUB signal cable to the MultiSync Macintosh cable
adapter
(
Figure A.3
). Tighten all screws.
For the DVD Player:
Connect the HDMI to DVI-D adapter (not included) to the DVD player. Attach the DVI signal cable to
the HDMI cable adapter (
Figure A.4
). Tighten all screws.
NOTE:
Some Macintosh systems do not require a Macintosh cable adapter.
User’s Manual
Power Cord
15-pin mini D-SUB
to 15-pin mini
D-SUB male
LCD monitor
(Stand not connected)
CD-ROM
Cable Holder
*
Remember to save your original box and packing material to transport or ship the monitor.
Audio Cable
Figure A.1
Figure A.3
Macintosh Cable Adapter
(not included)
Figure A.2
Figure S.1
Stand
Base
Locking Tabs
DVI-D to DVI-D
Figure A.4
HDMI to DVI-D adapter
(not included)
Pin-jack
From HDMI Output
DVI-D
RCA to Pin-jack
(not included)
Left Audio
Right Audio