46
Quick Start
Um den MultiSync
®
LCD Monitor an lhr System anzuschließen,
führen Sie bitte die foigenden Schritte aus:
1. Den Computer ausschalten.
2. Beim PC : Schließen Sire den 15-poligen Mini-D-SUB-Stecker des geeigneten Videosignalkabels an
die Buchse der Grafikkarte lhres Rechners
(Abbildung A.1)
an. Ziehen Sie alle Schrauben fest.
Beim Mac: Schließen Sie den MultiSync LCD
1510
™
, den MultiSync LCD
1510V
™
oder den
MultiSync LCD
2010
™
Macintosh-Kabeladapter an den Computer an
(Abbildung B.1)
.
Verbinden Sie das Ende des 15-poligen Mini-D-SUB-Steckers des geeigneten Signalkabels
mit dem MultiSync LCD
1510
, dem MultiSync LCD
1510V
oder dem MultiSync LCD
2010
Macintosh-Kabeladapter
(Abbildung B.1)
. Ziehen Sie alle Schrauben fest.
HINWEIS: Den MultiSync LCD
1510
, den MultiSync LCD
1510V
oder den MultiSync
LCD2010 Macintosh-Kabel-Adapter können Sie bei NEC Technologies
unter der Telefonnummer (800) 820-1230 bestellen.
3. Beim MultiSync LCD
1510
und MultiSync LCD
1510V
:
Schließen Sie den 15-poligen
Mini-D-SUB-Stecker des Videosignalkabels und des AC-Adapter-Kabels an die
entsprechenden Buchsen an der Rückseite des Monitors
(Abbildung C.1)
an.
Beim MultiSync LCD
2010
:
Nehmen Sie die Abdeckung auf der Rückseite des Monitors
(Abbildung D.1)
ab. Schließen Sie die BNC-Kabel und das AC-Adapter-Kabel an die
entsprechenden Buchsen an der Rückseite des Monitors an. Schließen Sie das rote BNC-
Kabel an die mit R gekennzeichnete, das grüne BNC-Kabel in die mit G/Sync und das
blaue BNC-Kabel an die mit B gekennzeichnete BNC-Buchse des Monitors an. Wenn Sie
eine vierte BNC-Buchse (Composite Sync) haben, stecken Sie diese in die mit H/CS
gekennzeichnete Buchse am Monitor. Wenn Sie eine fünfte BNC-Buchse (Vertical Sync)
haben, stecken Sie diese in die mit VS
(Abbildung D.1)
gekennzeichnete BNC-Buchse.
Legen Sie die 15-polige VGA zum BNC-Kabel unter Klammer A
(Abbildung D.1A).
Legen
Sie dann die 15-polige VGA zum BNC-Kabel unter die Klammer B
(Abbildung D.1B)
Befestigen Sie wieder die Abdeckung an der Rückseite des Monitors.
HINWEIS: Falsche Kabel können zu Fehifunktion führen, die Anzeigequalität/
Komponenten des LCD-Moduis beschädigen und/oder die Lebensdauer
des Moduis beeinträchtigen.
4. Schließen Sie ein Ende des Netzkabels an den AC-Adapter an und stecken Sie das andere
in die Steckdose
(Abbildung E.1)
.
5. Schalten Sie den Monitor
(Abbildung F.1
) und den Computer ein.
6. Zum voilständigen Aufbau lhres MultiSync LCD-Monitors:
A. Bei MultiSync LCD
1510
/LCD
1510V
-Monitoren wird die Auflösung auf 1024 x 768 @ 75 Hz,
beim MultiSync LCD
2010
-Monitor auf 1280 x 1024 @ 60 Hz eingestelt.
HINWEIS: Download-Informationen über die Windows 95/98
®
INF-Datei für lhren
MultiSync Monitor finden Sie in diesem Benutzerhandbuch unter dem Abschnitt
Verweise.
B. Benutzen Sie folgende OSM-Einstellfunktionen:
• Auto Adjust Contrast • Auto Adjust
• Image Adjust – Fine (nur auf dem MultiSync LCD2010-Monitor)
HINWEIS: Es ist möglich, daß eine manuelle Einstellung der H/V-Position und image
Adjust H. Size/Fine-Einstellfunktionen zum vollständigen Aufbau lhres
MultiSync Monitors notwendig ist. Eine volle Beschreibung dieser OSM-
Einstellfunktionen finden Sie in diesem Benutzerhandbuch unter dem
Abshnitt Einstellfunktionen.
7. Information über installation und Betrieb dieser Software finden Sie im Benutzerhandbuch in
der Pivot
®
Software CD-Schachtel.
HINWEIS: Beim Auftreten von Problemen lesen Sie bitte im Abschnitt Fehlerbehebung
dieses Benutzerhandbuchs nach.
78133314
2/8/99, 10:15 AM
48