19
Projection of Images (Basic Operation)
3-3. Step 2: Selecting the title of input signal
1 Turn on the power to a PC or other source connected to your
projector.
2 Press the MENU button.
3 Press the SELECT
button to display “Source Select” on the
LCD screen.
•
At each press of the SELECT
button, the display will cycle as “Source Select”
←→
“Setup”
←→
“information.”
4 Press the SELECT button.
The title of input signal is displayed.
•
When you have made a wrong selection, press the SELECT
button. A return will be made to
the previous menu.
5 Press the SELECT
button to display the “title of the signal to
be projected” on the LCD screen.
6 Press the ENTER button.
The title of the signal to be projected is selected.
•
The “(*)” mark on the liquid crystal display indicates that this is the currently selected item.
