13
Checking the Supplied Items and the Names of the Projector Parts
13. SELECT
buttons
•
Press the SELECT
button when a menu is being displayed, and a menu item can be
selected.
•
Press the SELECT
button when a menu is being displayed, and a submenu will be displayed.
•
Press the SELECT
button when a menu is being displayed, and a menu one level above will
be displayed.
•
During character entry, press the SELECT
button while depressing the CTL button, then
one character will be deleted.
14. ENTER button
Press the ENTER button, and the displayed menu item is actioned.
15. CANCEL button
Press the CANCEL button to return to the previous menu item.
16. UNDO button
Operate this button to reset to the state of adjustment and setting at the point when a menu is
displayed.
17. FOCUS
Ⳮ
/
ⴑ
button
Press the FOCUS +/- button while depressing the CTL button, to make lens focus adjustment. (See
page 20)
18. ZOOM
Ⳮ
/
ⴑ
button
Press the ZOOM +/- button while depressing the CTL button, to make lens zoom adjustment. (See
page 20)
19. CTL button
The CTL button is a shift function used to access alternative functions on other buttons.
NOTE
•
The following buttons cannot be used with this projector:
WHITE BAL., ADJUST PICTURE, IMAGE, INFO., PIXEL., AUTO, MUTE SOUND, MUTE OSD
䢇
Notes for Use of the Remote Control:
•
Do not drop or handle the remote control in a careless manner.
•
Do not allow the remote control to be splashed with water or any other liquid. If the remote
should get wet accidentally, wipe the liquid off immediately.
•
Be sure to use the remote control in a place free from heat or dampness as far as practicable.
•
Do not set dry batteries on the remote control. You can operate the remote control of this
projector only when it is connected to the projector with the supplied remote control cable.
