11
Checking the Supplied Items and the Names of the Projector Parts
-
-
1-4. Names of the remote control parts
NOTE
•
For operation with the remote control, be sure to connect the remote control to your projector, using the
supplied remote control cable.
1. POWER ON button
Operate this button to turn on the power to your projector.
Press it two seconds or longer.
When turning on the power to your projector, first set the
main power switch to ON, which puts your projector on
standby. (See page 17)
2. POWER OFF button
Operate this button to turn off (standby) the power to your
projector. Press it two seconds or longer.
3. Numeric buttons (1 to 0 buttons)
Use these buttons to enter alphanumeric characters. (See
page 25)
4. TEST button
•
Press this button, and a test pattern will be displayed.
5. KEYSTONE button
Press the KEYSTONE (R) button while depressing the CTL
button, then the red (R signal) of the test pattern will be
turned off temporarily. Press this button again while
depressing the CTL button, and the red (R signal) will be
projected again.
2
1
4
6
5
9
11
12
16
15
19
3
7
8
10
13
14
18
17
