CHAPTER 3 INSTALLATION
User’s Manual U16290EJ1V0UM
19
3.1
Connection
(1) Connection with IE-78K0S-NS or IE-78K0S-NS-A main unit
See the
IE-78K0S-NS User’s Manual (U13549E)
Note
for a description of how to connect the IE-789835-NS-EM1
to the IE-78K0S-NS.
Note
When using the IE-78K0S-NS-A, refer to the
IE-78K0S-NS-A User’s Manual (U15207E)
.
(2) Connection with emulation probe
Connect an emulation probe and supplied FG cable to the IE-789835-NS-EM1 as follows.
On this board, connect the emulation probe to CN1.
Caution
Incorrect connection may damage the IE system.
Be sure to read the emulation probe’s user’s manual for a detailed description of the
connection method.
<Steps>
<1> Remove two plates on the side of the IE-78K0S-NS or IE-78K0S-NS-A frame. Loosen one FG screw on the
lower side of the connector on the IE system side of the emulation probe, align one end of the FG cable and
fix it by securing the FG screw.
Figure 3-1. Connection of Emulation Probe (1)
Main board of
IE-78K0S-NS
(sold separately) or
IE-78K0S-NS-A
(sold separately)
Emulation board
IE-789835-NS-EM1
Emulation probe
SWEX-144SD-1
(sold separately)
CN1
FG cable (supplied)
Plate on side of
frame
