CHAPTER 3 INSTALLATION
User’s Manual U13742EJ2V0UM
29
<2> Prepare the IE-784225-NS-EM1.
<3> Remove the parts board that is mounted in the IE-784225-NS-EM1’s socket (the socket marked as USCLK).
<4> Connect the parts board (from <1> above) to the socket (USCLK) from which the parts board was removed
(see <3> above). Check the pin 1 mark to make sure the board is mounted in the correct direction.
<5> Install the IE-784225-NS-EM1 in the IE-78K4-NS.
The above steps configure the following circuit and enable supply of the clock from the mounted resonator to the
emulation device.
10 M
Ω
HCU04
HCU04
9 8
5
Rx
10
11
4
13
CB
2
3
CA
12
IE-78K4-NS side
(Emulation device)
Target
system
1
3
JP1
CLK IN
Remark
The sections enclosed in broken lines indicate parts that are attached to the parts board.
