CHAPTER 1 OVERVIEW
User’s Manual U14700EJ2V0UM
16
1.6
Connection Between IE-V850E-MC and IE-703116-MC-EM1
The procedure for connecting the IE-V850E-MC and IE-703116-MC-EM1 is described below.
Caution
Connect carefully so as not to break or bend connector pins.
<1> Remove the POD cover (upper and lower) of the IE-V850E-MC.
<2> Set the PGA socket lever of the IE-703116-MC-EM1 to the OPEN position as shown in Figure 1-3 (b).
<3> Connect the IE-703116-MC-EM1 to the PGA socket at the rear of the POD (refer to Figure 1-3 (c)). When
connecting, position the IE-V850E-MC and IE-703116-MC-EM1 so that they are horizontal.
Spacers can be connected to fix the POD (refer to
APPENDIX D MOUNTING PLASTIC SPACER
).
<4> Set the PGA socket lever of the IE-703116-MC-EM1 to the CLOSE position as shown in Figure 1-3 (b).
<5> Fix the IE-703116-MC-EM1 between the POD covers (upper and lower) with the nylon rivets supplied with
the IE-V850E-MC.
<6> Fix the POD cover (upper) end with nylon rivets.
Figure 1-3. Connection Between IE-V850E-MC and IE-703116-MC-EM1 (1/2)
(a) Overview
IE-V850E-MC
Nylon rivets
Upper cover
IE-703116-MC-EM1
Lower cover
Nylon rivets
Nylon rivets