NEC IE-703003-MC-EM1, Preliminary User'S Manual

Page: 21 / 28

CHAPTER 2 IE-703002-MC SETTING
10
1
2
3
2.2 Settings of JP1, JP3, and JP4
Set the JP1, JP3, and JP4 in the pod as follows.
Table 2-2. Settings of JP1, JP3, and JP4
Notes 1. Differs from factory-set status.
2. Keep the removed connector attached to one pin as shown in the drawing below.
JP1
Jumper contact
Remark IE-703002-MC operates under 5 V with the above described settings of JP3 and JP4, regardless of the
target system voltage.
Jumper Status
JP1
Note 1, 2
Open
JP3 Short
JP4
Note 1
1-2 short