i-Series Gateway
Page 4
G-6000G-SKE, Rev AA
Information for the System Administrator
Once your ISDN line is installed, you will be provided with two Service Profile Identifiers (SPIDs) and two
Directory Numbers (DNs). Provide these numbers to the System Administrator.
Note: When installing the ISDN TAs, make sure you write down the SPIDs and DNs. Keep this information
in a safe place for reference. If you do not have the SPIDs or DNs, you cannot program the ISDN TAs.
Installation Components
Table 1. Installation Components
D escription Function
Provided
W /
G atew ay
i-Series Gateway
9
Universal Power Cord
120 VAC outlet
9
DB-9 RS232 Serial Cable (6 foot)
Console port to PC for system
administration
9
Mounting Hardware
To attach brackets for rack mount
9
Mounting Brackets (2)
For rack mounting
9
RS-530 type cable for high-speed links to
CSU/DSU or TA
For connecting WAN ports on i-Series
Gateway to CSU/DSU or TA
9
System Administrator’s Guide
The complete guide for the i-Series
Gateway.
9
Quick Installation Guide
The condensed installation guide
9
RS-232, DB-25 to DB-9 modem cable
[male-male]. Note: This is a custom made cable.
For connecting the i-Series Gateway to a
modem for remote configuration.
Optional
50 pin cables with RJ-21 connectors.
Note: RJ21 cables, connecting blocks and
network cables may be ordered through NEC by
calling 1-617-454-6100.
Telephony interface between the punch
down blocks and the i-Series Gateway.
(See page 6.)
Needed
but not
supplied
Punch down blocks
Provides the interface between the RJ-21
connector and the PBX.
Needed
but not
supplied
Parts not provided with the i-Series Gateway
Digital telephones and communication line cords are NOT supplied with this system.
Note: Use two-wire digital telephones only.
