![background image](http://html.mh-extra.com/html/nec/fp1350-multisync-22-crt-display/fp1350-multisync-22-crt-display_service-manual_249598021.webp)
4-1
ASSEMBLY
•
Before you disassemble the set, turn off power and pull out the power plug.
•
Use the appropriate screwdrivers that first the screws. If you use screwdriver that does not fit, you may break
the screws.
•
Disassembly is the opposite process of assembly.
•
Carefully discharge the CRT anode potential by grounding to coating dag before removing Anode Cap.
REMARK
SYMBOL
Clamp the EMF COIL with
CLAMPER.(4 points)
The thick of the FMF COIL is
placed between and
132
REMARK
SYMBOL
Forming (Corner Coil)
133
These area are wire contact points.
Don’t bend these area.
EX.)
contact point
<OK>
<NG>
<NG>
Green
Green
each corner
132
(TOP)
CLAMPER,WIRE
EMF COIL
EMF’s connector
(Bottom)
A’
B’
A’
B’