![background image](http://html.mh-extra.com/html/nec/fp1350-multisync-22-crt-display/fp1350-multisync-22-crt-display_service-manual_249598010.webp)
2-5
Controls
OSM
TM
(On-Screen Manager) control buttons on the front of the monitor function as follows:
Main Menu
Sub-Menu
EXIT
Exits the OSM menu.
Exits to the OSM controls main menu.
CONTROL
/
Moves the highlighted area up/down to
select one of the controls.
Moves the highlighted area up/down to
select one of the controls.
CONTROL
/
Moves the highlighted area left/right to
select one of the controls.
Moves the bar in the - or + direction to
decrease or increase the adjustment.
PROCEED
Has no function.
Only executes control or enters sub, sub-
menu.
RESET
Resets all the controls within the
highlighted menu to the factory setting.
Resets the highlighted control to the
factory setting.
NOTE :
When
RESET
is pressed in the main and sub-menu, a warning window will appear allowing
you to cancel the reset function.
When OSM controls are activated, icons are displayed at the top of the menu.
If an arrow ( ) is displayed in a sub-menu, it indicates further choices are available. To enter a sub,
sub-menu, press
PROCEED.
Brightness/Contrast Controls
Brightness :
Adjusts the overall image and background screen brightness.
Contrast :
Adjusts the image brightness in relation to the background.
Degauss :
Eliminates the buildup of stray magnetic fields which alter the correct scan of the electron
beams and affect the purity of the screen colors, focus, and convergence. When activated, your
screen image will jump and waver a bit as the screen is demagnetized.
Caution : Please allow a minimum of 20 minutes to elapse between uses of the Degauss
Control.
Size and Position Controls
Auto Adjust :
Automatically adjusts the horizontal and vertical size and position settings for applicable
signal timings.
Left/Right :
Moves the image horizontally (left or right).
Down/Up :
Moves the image vertically (up or down).
Narrow/Wide :
Decreases or increases the horizontal size of the image.
Short/Tall :
Decreases or increases the vertical size of the image.