NEC Express5800/T71f, User Manual

Page: 36 / 141

24
Under Disks item, select the hard drives to be included in the RAID array. If only two hard drives are
installed, they will be automatically assigned to the array. Set the stripe block size if necessary. The stripe
block size can be set from 4 KB to 128 KB. Once you have selected the stripe block size, press
Enter
.
Enter the array capacity and press
Enter
. Finally press
Enter
on the Create Volume item to begin creating
the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm or <N> to
cancel.