1. Setup Procedure
Express5800/R320g-E4,
R320g-M4
Installation Guide (VMware)
54
Chapter 1 Installing Operating System
Note
With the ftSys Management Appliance, clock synchronization cannot be done using NTP.
The ftSys Management Appliance performs clock synchronization with the ESXi host at
intervals of 1 min by using VMware Tools.
You must not change the below setting because it is set by installation of the ft control
software.
1.
Right-click on the ftSys Management Appliance in Host Client.
2.
Click “Edit Settings” in the right-click menu.
3.
On the [VM Options] tab, select [VMware Tools]
4.
Confirm that the [Time] - [Synchronize guest time with host] check box is on.
Tips
If you need accurate clock management with the ftSys Management Appliance, set up NTP
on the ESXi host. If accurate clock management is active with NTP on the ESXi host, clock
management more accurate than that by the ftSys Management Appliance is achieved by
the VMware Tools clock synchronization function specified in Note above.
Note
When ESXi operates, the following alert message may appear on the console screen. This
message does not affect the operation, and you can ignore it. If this message appears,
press the <Alt + F2> key to switch the console screen.
