3. Setting Up Windows Server 2012
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows)
75
Chapter 1 Installing Operating System
(3)
Configuring Duplex LAN
This section describes how to configure duplex LAN.
Note
•
Because the configuration from the remote site may fail, you need to log on as an
Administrator or a member of Administrators group.
•
The screen images are subject to change because of the network driver
version.Substitute as appropriate when content has been modified.
1. Select
Start
→
Administrative Tool
→
Computer Management
→
Device Manager
.
Note
Check
Network Adapter
, and if LAN adapters are duplicated as shown below, remove all
LAN adapters from
Device Manager
, then select
Action
–
Scan for hardware changes
.
Stratus emb-82576 2-Port Gigabit Adapter
Stratus emb-82576 2-Port Gigabit Adapter
Stratus emb-82576 2-Port Gigabit Adapter #2
Stratus emb-82576 2-Port Gigabit Adapter #2
The display will be as follows when the actions are performed properly.
Stratus emb-82576 2-Port Gigabit Adapter
Stratus emb-82576 2-Port Gigabit Adapter #2
Stratus emb-82576 2-Port Gigabit Adapter #3
Stratus emb-82576 2-Port Gigabit Adapter #4
When 10GBASE-T is used, the network adapter names"Stratus emb-X540 2-Port Copper
10 Gigabit Adapter" and "Stratus X540 1-Port Copper 10 Gigabit Adapter" are displayed.
2. Select a target LAN Adapter. Select
Properties
from the right-click menu to open the
Properties
window.
