List of Windows Event Log
Installation Guide (Windows Server 2016)
98
Chapter 3 Appendix
ID
Source
Level
Message (Description)
Timing when an event is logged
Action
Windows Server 2016 ”System Log”
91
icea
Error
Intel(R) Ethernet Network Adapter E810-XXV-2 xxx
PROBLEM: The DDP package signature is not valid and cannot be
loaded. Entering Safe Mode.
ACTION: Install the latest driver from
"http://www.intel.com/support/go/network/adapter/home.htm.
* x is a different display name depending on the LAN board.
When installing an OS, starting system, or
applying Standard Program Package
This event does not affect system operation.
101
i40eb
Warning
HPE Ethernet xGb x-port xxxx Adapter
PROBLEM: Flow Control disabled on this interface. For RDMA
traffic, it is recommended that flow control be enabled end to end on
all network interfaces and switches to avoid performance
degradation from dropped packets.
ACTION: Enable link level flow control or priority flow control for
network direct port 445 on this interface.
* "x" depends on the system environment.
When installing an OS, starting system, or
applying Standard Program Package
This event does not affect system operation.
After Standard Program Package is applied, this log will no longer be
registered.
101
icea
Warning
Intel(R) Ethernet Network Adapter E810-XXV-2 xxxxx
PROBLEM: Flow Control disabled on this interface. For RDMA
traffic, it is recommended that flow control be enabled end to end on
all network interfaces and switches to avoid performance
degradation from dropped packets.
ACTION: Enable link level flow control or priority flow control for
network direct port 445 on this interface.
* "x" depends on the system environment.
When installing an OS, starting system, or
applying Standard Program Package
This event does not affect system operation.
After Standard Program Package is applied, this log will no longer be
registered.
219
Microsoft-Windows-
Kernel-PnP
Warning
The driver \Driver\WudfRd failed to load for the device
xxxxxxxxxxxxxxxxxx.
When starting system or connecting a disk
This may be recorded when starting the system or connecting a disk
depending on timing, but does not affect system operation.
225
Kernel-PnP
Warning
The application YYY with process id XXX stopped the removal or
ejection for the device ZZZ.
* ZZZ : Instance name of the device
YYY : Name of the process that was using the device
XXX : ID of the process that was using the device
When applying Standard Program Package
This event does not affect system operation if it is logged when
applying Standard Program Package.