
3. Installing Windows Server 2016
Installation Guide (Windows Server 2016)
60
Chapter 1 Installing Windows
3.5
Setup of Device Drivers
Install and set up device drivers provided for the standard configuration of the server.
For details regarding the installation and setup of a driver for an optional device, refer to the manual supplied with
the optional device.
3.5.1
Installing the LAN drivers
(1)
LAN drivers
The drivers are installed by Standard Program Package.
Important
Wake On LAN (WOL) is supported by onboard network adapters and
N8104-171/172/173/175/193/194/195/206/207/208/213/217 only. Wake On LAN
is available after installing the LAN driver.
For Wake On LAN of R120h-1E / R120h-2E / T120h onboard network
adapters and N8104-172/175/193/194/195/206/208, when using Wake On LAN
see
Chapter 1 (3.5.2 Setting up LAN drivers - (3) Setting up Wake on LAN)
.
BIOS settings, check Maintenance Guide.
Note
To change the LAN driver settings, sign in to the system from a local console
using an administrator’s account. Remotely changing the settings by using the
operating system’s remote desktop feature is not supported.
Choose the
Internet Protocol (TCP/IP)
check box when specifying an IP
address.
(2)
Optional LAN board
This server supports the following optional LAN boards.
R120i-1M
R120i-2M
N8104-206/207/208/209/210/211/212/217/219
R120h-1M
R120h-1M (2nd-Gen)
R120h-2M
R120h-2M (2nd-Gen)
N8104-171/172/173/175/176/177/178/179/180/181/182/183/184/185/186/187
R120h-1M (3rd-Gen)
R120h-2M (3rd-Gen)
N8104-172/175/178/179/180/181/182/183/184/185/186/187/213/215
R120h-1E
R120h-2E
N8104-171/172/173/175/176/177/178/179/180/181/182/183/184/185/186/187/
193/194/195
T120h N8104-178/179/180/181/182/183/184/185/186/187
R110j-1 N8104-171/172/173/176/178/179/180/181/182/183/185/186
If you install the LAN boards after installing Standard Program Package, install Standard Program Package again
according to
Chapter 1 (3.4 Standard Program Package Installation)
.