7. Resetting and Clearing the Server
Express5800/E120g-M Maintenance Guide
44
Chapter 1 Maintenance
•
Clearing a password
1. Turn off the server, and disconnect the AC power cord from power supply units.
See
Chapter 2 (1. Installing Internal Optional Devices)
in "
User’s Guide
"
to remove server module.
2. Locate the PASSWORD CLEAR jumper by referring the above figure.
3. Change the jumper switch from
Default
to
Clear
.
4. Reassemble the server and turn on the server.
POST will halt with the following error message.
ERROR
8007: Password Cleared By Jumper.
Press<F1> to resume, <F2> to Setup
5. Turn off the power and return the jumper switch to
Default
by the same manner.
6. Reassemble the server.
