1. Installing Internal Optional Devices
Express5800/E120d-1 User’s Guide
72
Chapter 2 Preparations
1.8.7
RS-232C Connector Kit(N8117-01A)
This section describes how to install an optional RS-232C Connector Kit
For details, refer to the manual that comes with optional RS-232C Connector Kit (N8117-01A).
Packing box contains the items shown in the table below. Check these items.
No. Item Specification
Quantity
Remarks
(1)
RS-232C Connector Kit
User's Guide
856-125671-002 1
(2) RS-232C
cable(A)
804-063264-020
1
(3) RS-232C
cable(B)
804-062746-820
1
(4)
PCI bracket (1)
243-112122-001
1
Attached to the cable
(5)
PCI bracket (2)
243-112122-002
1
For Full-height PCI slot
This server is used by combination of (3) and (4).
Install the RS-232C Connector Kit in the following procedures.
1. Refer to steps 1 to 6 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations
2. Remove the screw securing the PCI riser
card. Hold the both ends of the PCI riser
card and lift it off.
(5)
(3)
(4)
(2)
Screw
