NEC Express5800/E120d-1 User Manual Download Page 37

Page: 37 / 110

4. Names and Functions of Parts

Express5800/E120d-1 User’s Guide

Chapter 1 General Description

4.6

Status Indicators

This section explains the indication and meanings of the server LEDs.

4.6.1

POWER LED (

)

POWER LED indicates power ON/OFF status of the server.

POWER LED

Description

On (green)

The server is normally powered on.

On (amber)

BMC is being initialized.

When connecting the power cord, the LED goes on amber for 40 seconds.

After the amber LED becomes unlit, the server is available for powering on.

Do not power on the server while the LED is lit amber.

Off

The server is off-powered.

The server is in halt status.

Summary of Contents for Express5800/E120d-1















































































































Search results

Summary of Contents for Express5800/E120d-1

Reviews:

Related manuals for Express5800/E120d-1

Brands by name

Popular brands

NEC Express5800/E120d-1, User Manual

Search results

Summary of Contents for Express5800/E120d-1

Reviews:

Related manuals for Express5800/E120d-1

Brands by name

Popular brands