background image

G-18  

Mounting the Server on the Rack 

This section describes the procedure of mounting the server of the rack mounting model on a 19-inch rack sequentially. 

Mount the server on a rack in the following steps: 

Step 1 

Installing components on rack 

Step 2 

Mounting server on rack 

Step 3 

Installing cable arm and front bezel 

Step 4 

Performing processes from server power-on to online setting 

 

NOTES ON RACK AND SERVER 

Always read "Notes on Use" at the top of the guide before starting the procedures described in this chapter. 

The manuals attached to the server describe the notes on the server. Refer to the manuals also. 

These notes are intended to protect personnel from danger. Never forget to read them. 
The procedures in this chapter also include several notes. 

 

Summary of Contents for Express5800 140He















































































































































































































































































































































































































Reviews: