1-5-14
120Rj-2
Optional Boards and Adaptable Expansion Slots
Bus A
Bus B
Bus C
Bus E
PCIe
#1C
PCIe
#2C
PCIe
#3C
PCI-X
#1B
PCI-X
#2B
PCIe
#3B
x8
x4
x4
x8
Slot size
(Full-height or Low Prof ile)
Supported board type
x8
socket
x8
socket
Installable board type
*1
-
-
-
O
-
-
-
Installed in as standard
N8103-90
-
-
-
-
-
O
Max. 2
N8103-90 cannot connect to the internal HDDs
N8103-95
-
-
-
O
O
-
Max. 3
N8103-75
-
-
-
O
O
-
Max. 3
Do not use with N8103-107
N8103-107
O
O
-
-
-
O
Do not use with N8103-75
N8103-104
O
-
-
-
-
O
Max. 2, not for internal HDD
N8190-120
-
-
-
O
O
-
N8190-127
O
O
-
-
-
O
N8190-131
O
O
-
-
-
O
N8104-111
-
-
-
O
O
-
N8104-119
-
-
-
O
O
-
N8104-120
-
-
-
O
O
-
N8104-126
O
O
-
-
-
O
Max. 2
*4
N8104-121
-
-
-
-
-
O
10BASE-T is not supported.
*5
N8104-122
O
O
-
-
-
-
Max. 2
10BASE-T is not supported
*5
N8104-112
-
-
-
O
O
-
Max. 1 (When configuring AFT teaming, max.2)
*3
N8104-123A
O
-
-
-
-
O
Max. 1
Remarks
SCSI controller
(64bit/133MHz PCI-X)
64bit
100MHz
Bus D
Standard riser card
*2
Product name
SCSI controller
(64bit/66MHz PCI)
3.3V
Standard Slots
RAID Controller (128MB, RAID 0,1)
(PCI EXPRESS (x8))
N code
Full Height
Low Profile
MD2
Long/Short
SAS controller
(PCI EXPRESS(x8))
x4 socket
*3
1000BASE-T adapter
(64bit/133MHz PCI-X)
1000BASE-T adapter (2ch)
(64bit/133MHz PCI-X)
SCSI controller
(PCI EXPRESS(x1))
Fibre Channel controller (4Gbps/Optical)
(PCI EXPRESS(x4))
Disk array controller (SAS, External)
(PCI EXPRESS (x8))
Fibre Channel controller (4Gbps/Optical)
(PCI EXPRESS(x4))
Fibre Channel controller (2Gbps/Optical)
(64bit/133MHz PCI-X)
10GBASE-SR adapter
(PCI EXPRESS(x8))
100BASE-TX adapter
(32bit/33MHz PCI)
1000BASE-SX adapter
(64bit/133MHz PCI-X)
1000BASE-T adapter (2ch)
(PCI EXPRESS(x4))
1000BASE-T adapter
(PCI EXPRESS(x1))
1000BASE-T adapter (2ch)
(PCI EXPRESS(x4))
*1 Maximum board length
Full Height short: up to 173.1mm long: up to 312mm
Low Profile MD1: up to 119.9mm MD2: up to 167.6mm
*2 To install optional Riser Cards [N8116-07/-08/-18], remove the standard riser card. The optional cards are
mutually exclusive.
*3 Up to one each PCI bus. The 120Rj-2 allows up to two N8104-120 adapters. Do not use the N8104-119/-
120 adapters with the N8104-112 adapter in the same system.
*4 The N8104-126 adapter can be teamed to the identical adapter only (not to other adapters).
*5 Cannot be teamed to other adapters for AFT and ALB. The 120Rj-2 supports up to two adapters
([N8104-121] and/or [N8104-122]).
Note:
• You cannot create an AFT or ALB team across the standard LAN interface and optional LAN board.
• PCI boards with different clock speeds operate at the lowest speed when inserted into the same PCI
bus.
• You cannot use two or more PCI boards when installing four or more 8GB Memory Module Set
[N8102-312].
