2-12
Setting Up the System
No
Yes
Figure 2-9. Installing the Slide rail Assemblies
9.
Carefully align the rear holes of the slide rail assembly with the holes in the
rear vertical-mounting rail.
10.
Install two screws and washers to secure the rear of the slide rail assembly to
the vertical-mounting rail. See Figure 2-10. Use the screws shown as “D” in
Figure 2-1.
11.
Tighten all four screws holding the slide rail assembly to the vertical
mounting rails.
12.
Adjust and tighten the four screws that attach the outer and inner brackets
together. See Figure 2-8, A.
13.
Repeat steps 5 through 12 for the mounting the other slide rail assembly on
the right side of the rack cabinet.
Summary of Contents for EXPRESS5800/120Le
