![background image](http://html.mh-extra.com/html/nec/express5800-110ri-1/express5800-110ri-1_user-manual_251179271.webp)
Upgrading Your Server 9-23
Installation
Install the board in PCI board slot in the following procedure.
NOTES:
When installing a PCI board, make sure that the board connector
matches the connector of the PCI board slot.
Install the board that is connected with the internal hard disk drive
to the full-height side of riser card, regardless of its shape.
IMPORTANT:
The server can contain a short-type PCI board only,
not the long-type one.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove a fixing screw and hold both ends of the riser card assembly and lift straight up
and remove the riser card from the server.
3.
Remove the screw from the riser card, and remove the extension slot cover.
IMPORTANT:
Keep the removed extension slot cover for future use.
Full height side
Low profile side
Summary of Contents for Express5800/110Ri-1
