NEC Express5800/1020Ba, User Manual

Page: 51 / 142

b) CPU Blade LAN Configuration
Click CMM Shared Configuration to set the LAN configuration of each CPU Blade. After
setting the LAN configuration, BMCFW and CMMFW are rebooted automatically (this
could take a few minutes). During BMCFW and CMMFW reboot, the CMM Web Console
and the CMM/BMC/Host Telnet Console can not be used.
i)
TimeSynchronize: Synchronize CMM Blade time to one CPU Blade. To disable
TimeSynchronize functionality, select “none”.
ii) AcLink (1-9/ALL): Automatically Power On the CPU Blade when AC power On
iii) Power ON Interval: Interval between each CPU Blade Power ON. (X second)
iv) IpAddr: IP address (IPv4)
v) SubnetMask: Subnet Mask
vi) GatewayIpAddr: Gateway IP address
vii) DefaultGatewayMacAddr: Default Gateway MAC Address (XX:XX:XX:XX:XX:XX)
Check the Default Gateway MAC address by ‘arp’ command.
viii) LanPortUse: Use of CPU Blade LAN port for CMM and CPU Blade management
communication.
(1: Enable 0: Disable)
Figure 2.2-7 CMM Shared Configuration Menu
2-17