NEC Express5800/1020Ba User Manual Download Page 43

Page: 43 / 142

2.1.5 DVD-ROM

Drive

A DVD-ROM drive is installed in the Blade Chassis as standard equipment. The DVD-ROM

drive supports DVD-ROM and CD-ROM media.

2.1.5.1 Inserting / Removing a Disc in the DVD-ROM Drive

1. Inserting a Disc

Press the Eject button on the DVD-ROM drive to eject the drive tray.

Place the disc on the tray, label facing left.

Press the Eject button on the DVD-ROM drive to insert the tray.

2. Removing a Disc

Check that the drive access LED (orange) is off.

Press the Eject button on the DVD-ROM drive to eject the tray.

Remove the disc.

Press the Eject button on the DVD-ROM drive to insert the tray.

Figure 2.1-6 Inserting / Removing a Disc

Take care when inserting and removing DVD-ROM media. To prevent

injury, keep hands away from the tray when ejecting or inserting the tray.

2-9

Summary of Contents for Express5800/1020Ba















































































































































Search results

Summary of Contents for Express5800/1020Ba

Reviews:

Related manuals for Express5800/1020Ba

Brands by name

Popular brands

NEC Express5800/1020Ba, User Manual

Search results

Summary of Contents for Express5800/1020Ba

Reviews:

Related manuals for Express5800/1020Ba

Brands by name

Popular brands