NEC Express5800/1020Ba User Manual Download Page 129

Page: 129 / 142

4.2.3 ESMPRO/ServerManager

ESMPRO/ServerManager lets a system administrator manage remote servers across a network using

SNMP.

Table 4.2-2

explains main features of ESMPRO/ServerManager. For installation procedure and

detailed explanations on ESMPRO/ServerManager, refer to the ESMPRO/ServerManager Installation

Manual.

Table 4.2-2 ESMPRO/ServerManager Feature

Feature

Description

Failure Management

Displays failures detected by ServerAgent in the Alert Viewer.

Performance Management

Displays CPU / Memory / Disk / LAN usage of a server in a graph

format. ServerAgent always monitors a server and it will report to

ServerManager if any usages go over the predefined threshold.

Configuration Management

Displays hardware components (CPU, Memory, Disk, LAN, etc) and

OS / application information and current status.

4.2.3.1 Installing Report table

The report table for the CMM Blade and the InfiniBand switch has to be installed in the management

PC in order for ESMPRO/ServerManager to receive alerts from the CMM Blade and the InfiniBand

switch. The report table for the CMM Blade is included in EXPRESSBUILDER, and the report table for

the InfiniBand switch is included in InfiniBand Builder.

4.2.4 InfiniBand Management software and others

For InfiniBand management software, see the User’s Guide (InfiniBand) included in InfiniBand Builder.

For other management software (ex. Fibre Channel storage management software), see the

documents for those related products.

4-3

Summary of Contents for Express5800/1020Ba















































































































































Search results

Summary of Contents for Express5800/1020Ba

Reviews:

Related manuals for Express5800/1020Ba

Brands by name

Popular brands

NEC Express5800/1020Ba, User Manual

Search results

Summary of Contents for Express5800/1020Ba

Reviews:

Related manuals for Express5800/1020Ba

Brands by name

Popular brands