1. Installing Internal Optional Devices
Express5800/R120h-2M (2nd-Gen) User’s Guide
91
Chapter 2 Preparations
Installing Secondary Riser Card
Please prepare the following before installing the options.
Parts included in the option kit
T-10 hexalobular driver
Note
In order to prevent the damage to server's main body or the expansion board,
please remove all the AC power cables before removing/installing riser card.
To install the components, follow these steps.
1.
See steps 1 to 6 in
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
2.
Unfasten two screws securing the rear blank cover, and pull up the blank cover to remove it.
Note
Keep each removed blank covers.
3.
Adjust the position of the riser card edge of the secondary riser card to the position of the connector, and
push it in place from above.
Raise the screw handles located on the upper part of the riser card and push it downwards while turning it
180° to the right to fix the riser card in place. Then, return the screw handles to their original positions.
