2. Description on System Utility
Express5800/R120h-2M (2nd-Gen) User’s Guide
238
Chapter 3 Setup
(4/4)
Category
Description
To be changed
Remark
Security
Restrict System
Utilities operations
with a password
Set your password in
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
Server
Security
-
Set Admin Password
If you set your password,
your are prompted to enter
the password from the next
time you start System
Utility
Restrict bootup by
entering password
Set your password in
System Configuration
>
BIOS/PlatformConfiguration (RBSU)
>
Server
Security
using
Set Power On Password
If you set your password,
your are prompted to enter
the password from the next
time you start the system
To make Intel(R)
TXT(Trusted
Execution
Technology), which is
needed for
tboot(Trusted Boot),
enabled
Install optional TPM kit and set to
Enabled
in
System Configuration
>
BIOS/Platform
Configuration (RBSU)
>
Server Security
- Intel
(R) TXT Support.
Do not disable TPM with
the TPM management
module after setting [TXT
Support] to [Enabled] to
start OS. You may not be
able to change [TPM
Support] and [TXT
Support].
In that case, execute [F7:
Load Defaults].
UPS
Powerlink
When the server is
supplied with power
from UPS, always turn
on the power.
Set to
Always Power On
in
System
Configuration
>
BIOS/Platform Configuration
(RBSU)
>
System Options
>
Server
Availability
-
Automatic Power-On
To connect the UPS to the
serial port, set [Disabled]
for the settings below.
1. Set to
Disabled
in
System Configuration >
BIOS/Platform
Configuration (RBSU) >
System Options > Serial
Port Options > BIOS
Serial Console and EMS -
BIOS Serial Console Port.
2. Set to
Disabled
in
System Configuration >
BMC Configuration Utility
> Setting Options - Serial
CLI Status.
If it is turned off by
using POWER switch,
leave it OFF even
when UPS supplies
power.
Set to
Restore Last Power Stats
in
System
Configuration
>
BIOS/Platform Configuration
(RBSU)
>
System Options
>
Server
Availability
-
Automatic Power-On
Keep the power OFF
even when UPS
supplies power.
Set to
Always Power Off
in
System
Configuration
>
BIOS/Platform Configuration
(RBSU)
>
System Options
>
Server
Availability
-
Automatic Power-On
*1 The factory setting is that “the Boot Mode menu” is set as “UEFI” and “the X2APCI menu” is set as “Enabled”.
