2. List of Windows Event Logs
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
206
Chapter 3 Appendix
Windows Server 2012 R2
System Log
2
Microsoft-Windows-
Kernel-EventTracing
Error
The session “” could not be started due to the following error:
0xC000000D
When running an OS for the first time
This event does not affect system operation.
4
b57nd60a
Warning
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Check to make sure the network cable is properly connected.
When installing an OS, starting system,
or applying Starter Pack
This event does not affect system operation.
4
l2nd
Warning
QLogic BCM57810 10 Gigabit Ethernet (NDIS VBD Client) #xx:
The network link is down.
Check to make sure the network cable is properly connected.
When installing an OS, starting system,
or applying Starter Pack
This event does not affect system operation.
11
Megasas
Error
The driver detected a controller error on
\Device\RaidPort(x)
.
When applying Starter Pack
This event does not affect system operation if it is logged when applying
Starter Pack.
27
ixgbs
Warning
Intel(R) Ethernet Controller X550 #xx
Network link is disconnected.
When starting system or installing
Starter Pack
This event does not affect system operation.
46
volmgr
Error
Crash dump was not initialized.
When installing an OS
Refer to the following website.
http://support.microsoft.com/kb/2756313
129
Megasas35
Warning
Reset command is issued to device \Device\RaidPort(x).
(Any number replaces x)
While the system is running
This event does not affect system operation. If this message is logged
because OS has succeeded retry process.
134
Microsoft-Windows-
Time-Service
Warning
The manual peer that is used as the time source in NtpClient could not
be set due to DNS resolution error at “time.windows.com,0x9”. Retry
after 15 minutes and, after that, retry at double intervals.
When installing an OS, starting system,
applying Starter Pack
If it is not registered after connection with the Internet, there is no
problem for system operation.
153
disk
Warning
The I/O operation at the logical block address for disk was retried.
The on-screen indication may differ depending on system
environment.
The character string of this event may not be displayed correctly,
however, it does not affect the system operation.
When creating logical drive by Universal
RAID Utility
If this event is logged when creating a logical drive by Universal RAID
Utility, there is no problem in system operation.
The character string of the event will be correctly displayed by applying
the Microsoft's update program on the following site:
http://support.microsoft.com/kb/2925479
