English-63
English-62
Before Calling Service
Please make these simple checks before calling service. These tips may save
you time and money as charges for receiver installation and adjustments of
customer controls are not covered under your warranty.
Symptoms
Items To Check And Actions To Follow
No power
• Check to see if the display’s AC power cord is plugged
into the outlet.
• Unplug the display and after 60 seconds reinsert the plug
into the outlet and power on the display.
No picture
• Adjust the contrast and brightness settings.
Good picture but no
sound
• Increase the volume.
• Confirm that the display is not muted by pressing the
Mute
button on the remote control.
Good sound but poor
color
• Adjust the contrast, color and brightness settings.
Poor picture
• Change setting of MEMC at OSD (Only for E557Q /
E657Q).
Presence of a horizontal
dotted line
• This may be caused by electrical interference (e.g. hair-
dryer, nearby neon lights, etc.).
• Power cycle the equipment by turning off and then turning
back on.
Display not responding
via the remote control
• Determine if the batteries are working and replace
batteries if necessary.
• Clean the remote control sensor lens on the display.
• If necessary, utilize the buttons located on the side of the
display.
