English-57
English-56
Controlling the Display via LAN Control
Connecting to a Network
Using a LAN cable allows you to specify the Network Settings by using an HTTP
server function.
To use a LAN connection you are required to assign an IP address.
Example of LAN connection:
Server
Hub
LAN cable
(not supplied)
NOTE: Use a category 5 or higher LAN cable.
Network Setting by Using an HTTP Browser
Overview
Connecting the monitor to a network allows for monitor control from a
computer via the network.
The IP address and subnet mask of the monitor can be set on the Network
Setting screen of the web browser by using an HTTP server. Please be
sure to use “Microsoft Internet Explorer 10” or a higher version for the web
browser.
(This device uses “JavaScript” and “Cookies” and the browser should be set
to accept these functions. The setting method will vary depending on the
version of the browser. Please refer to the help files and the other information
provided in your software.)
Access is gained to the HTTP server function by starting the Web browser
on the computer via the network connected to the monitor and entering the
following URL as described below:
