38
•
Press
Left Softkey
to withhold for all calls and
Right Softkey
to cancel.
The security settings protects your phone from improper and unauthorized use.
These confidential numbers should be kept in a safe place for future access, if required.
You may be required to enter one of the following security codes as shown below. When the phone prompts you for one of these codes, use the
keypad to enter the appropriate number and press
Left Softkey
to confirm.
•
PIN code (provided by your network to protect your SIM card if it is stolen)
•
PIN2 code (provided by your network for charge information and FDN services protection)
•
PUK/PUK2 code (respective personal unblocking code in case you forget the PIN/PUK code)
•
Phone code (default setting is “0000”)
If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
If the PIN2 code is entered incorrectly 3 times, you will need to contact your service provider for a PUK2 code.
The PIN codes and security codes are between 4 to 8 digits.
If the phone code is entered incorrectly 10 times (not necessarily in the same session), the Phone code will be locked. In order to
unlock the code, you will need to contact your service provider.
Change PINs
The PIN will be requested most of the times when the phone is switched on. This feature can be deactivated, at the risk of unauthorized usage of your
phone. Some service providers do not permit the deactivation of this control.
You can set up your phone to require your
PIN code
entered when the phone is switched on before the phone can be used and receive any
incoming calls. If you entered your
PIN code
incorrectly for more than three times (not necessarily in the same session), you will have to contact your
service provider for a
PUK code
to unblock your SIM card.
Your phone supports advanced features (e.g. FDN) that may require a PIN2 code to be entered before they can be accessed or
modified.
To activate PIN
•
From the main menu, select
Settings
>
Security
. Highlight
PIN activate
and press
Left Softkey
to toggle PIN activate Enable/Disable. You
will have to key in a
PIN code
for activation. A tick in the check box beside the option indicates that
PIN activate
has been activated.
PIN/PIN2/Phone code change
•
From the main menu, select
Settings
>
Security
>
Code
.
•
Select either
Change PIN
/
Change PIN2
/
Chg. phone code
.
•
Key in the current code. You will be prompted to enter the new code when the correct current code is entered. Enter the new code again and
press
Left Softkey
to confirm the new code.
•
A confirmation screen is displayed momentarily and the phone returns to
Code
display menu.
Security
