20
Changing the battery
Make sure the phone is switched off. Some settings, stored numbers, and messages may be lost if the battery is removed while the power is on.
1 Press down the slit of the rear cover.
2 While pressing down the rear cover, slide the rear cover about 3 mm in the direction indicated by the arrow.
3 Remove the rear cover.
4 Put the new battery into place in the direction indicated by the arrow, making sure that the metallic part in the right direction and the tab of the
battery fit properly into the notch in the phone.
5 Lower the battery towards the phone to lock into place.
6 Place the rear cover about 3 mm away from the end with the notches and slide the rear cover in the direction indicated by the arrows until a click
is heard.
Switching the phone on
Press and hold
key for at least two seconds to switch on.
The screen is either blank, displays an animation, or displays a greetings message during the powering on process. After the powering on process,
the phone displays the standby screen.
You may need to enter your PIN code or password.
The greetings message may not be as indicated if any locks have been set or the wrong SIM has been inserted.
Switching the phone off
Press and hold
key for at least two seconds to switch off.
When you switch off and switch on your phone, the data in the phonebook list and messages folder will take some time to initialise
before they can be properly displayed.
Powering on the phone
Rear cover
Slit
About 3 mm
Metallic
part
Notch
Battery
Fit the metallic part and
notch of the battery to those
of the phone respectively.
Check that there is no gap
between the rear cover and
the phone body.
