![background image](http://html1.mh-extra.com/html/nec/dth-4r-2-cordless-lite-ii-blac/dth-4r-2-cordless-lite-ii-blac_owners-manual_3889731041.webp)
D
term
™
Cordless II Owner’s Guide
4 - 5
NEC Unified Solutions, Inc.
Document Revision 3
Switching Between the Desktop Multiline Telephone and the
Cordless Telephone Using the Base Unit
When the D
term
Cordless II is associated with a multiline telephone the
following is applicable:
Switching between cordless and desk mode must be done while both
telephones are idle.
A call in progress cannot be switched between the D
term
Cordless II
and the associated
multiline telephone
.
Switching held calls between the D
term
Cordless II and the associated
multiline telephone
is not recommended since line key LED indications
will not be provided.
Use the base unit on the D
term
Cordless II to switch between the D
term
Cordless II and the multiline telephone.
To perform switching:
Press Cordless to select the D
term
Cordless II.
- OR -
Press Desk to select the Multiline Telephone. (Refer to
Figure 4-2 Cordless
and Desk Buttons
.)
The D
term
display indicates DESK TEL when the multiline telephone is
connected.
Figure 4-2 Cordless and Desk Buttons