![background image](http://html1.mh-extra.com/html/nec/dth-4r-2-cordless-lite-ii-blac/dth-4r-2-cordless-lite-ii-blac_owners-manual_3889731032.webp)
Document Revision 3
NEC Unified Solutions, Inc.
3 - 14
Installing the D
term
Cordless II
3.
Replace the cover and slide it up until it latches onto the handset.
S
ECTION
8
C
HARGING
B
ATTERIES
Charging the Handset Battery Pack
The rechargeable battery pack must be fully charged before using the D
term
for the first time.
Charge the battery pack without interruption for five to eight hours.
1.
Place the handset in the front slot of the charging unit.
2.
Make sure the CHARGE 1 indicator lights. If the CHARGE 1 LED does
not come on, check to see if the AC adapter is plugged in and that the
handset is making good contact with the charging contacts on the
charging unit.
The CHARGE 1 LED turns red during and after charging the handset
with the battery.
Battery Hot Swap
The battery can be hot swapped while a conversation is taking place. The
battery must be changed within 30 seconds otherwise, connection will be lost.
Refer to
Section 7 Installing the Handset Battery Pack on page 3-13
for
instructions for changing batteries.
Figure 3-19 Replacing the Battery Cover