NEC DT410 Series User Manual Download Page 39

Page: 39 / 259

INSTALLING/REMOVING KEY SET
UNIT

• TO REMOVE KEY SET UNIT (LINE KEY

PANEL, BUTTON PANEL, AND LINE KEY
CARD)

STEP 1: Insert a tapered rod lightly into the right side

of the line key panel/button panel.

STEP 2: Lift out the line key panel/button panel to re-

move it from the telephone.

STEP 3: Remove the line key card.

• TO INSTALL KEY SET UNIT (LINE KEY

PANEL, BUTTON PANEL, AND LINE KEY
CARD)

STEP 1: Align the holes in the line key card with the

buttons on the telephone.

STEP 2: Align the holes in the line key panel/button

panel with the buttons on the telephone and
then push the four corners of the panel until
the panel clicks into place.

DT830 DT430/410

Line Key Panel

Button Panel

Line Key Card

Line Key Panel

Button Panel

Summary of Contents for DT410 Series




































































































































































































































































Search results

Summary of Contents for DT410 Series

Reviews:

Brands by name

Popular brands

NEC DT410 Series, User Manual

Search results

Summary of Contents for DT410 Series

Reviews:

Brands by name

Popular brands