Extension Hunting
66
◆
Features
DSX Feature Handbook
Operation
Sending a Call to a Terminal or Circular Hunting Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To send a call to a Terminal or Circular Hunting Group:
1.
Do one of the following.
a.
Transfer an outside call to a hunt group member.
b.
Set up a DIL to a hunt group member.
c.
Place a ringing Intercom call to a hunt group member.
d.
Set up a hunt group member as a line’s over
fl
ow destination.
Sending a Call to a UCD Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To send a call to a UCD Group:
1.
Do one of the following.
a.
Transfer a call to the UCD Group master number.
b.
Set up a DIL to the UCD Group master number.
c.
Place an Intercom call to the UCD Group master number.
d.
Set up the UCD Group master number as a line’s over
fl
ow destination.
Removing/Reinstalling your Extension from your UCD Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To temporarily remove/reinstall your extension from your UCD Group:
1.
Press
INTERCOM
and dial
*5
.
2.
Do one of the following:
a.
Dial
4
to return your extension to your UCD Group.
b.
Dial
6
to remove your extension from your UCD Group.
3.
Press
SPEAKER
to hang up.
Summary of Contents for DSX-40 DEMO KIT
