background image

Loop Keys

102

Features

DSX Feature Handbook

Loop Keys

Description

Loop keys are Feature Keys that simplify the way extension users place and answer outside calls. There are 
two types of loop keys: Switched Loop keys and Fixed Loop keys.

Switched Loop Keys

For incoming calls, Switched Loop keys provide an appearance for any line 

not

 assigned to a line key for 

which the extension has access and ringing. Switched Loop keys insure that there is a visual appearance for 
lines that do not ring an extension’s line keys.

For outgoing calls, Switched Loop keys provide convenient access to Line Groups. For example, instead of 
pressing 

INTERCOM

 and dialing 90 for Line Group 90, the user can just press the Switched Loop key and 

dial 0 instead.

Fixed Loop Keys

For outgoing calls, a Fixed Loop key is a loop key assigned to a speci

fi

c Line Group. When the extension 

user presses the Fixed Loop key for an outgoing call, they get the 

fi

rst line in the group assigned to the key.

For incoming calls, the Fixed Loop key works just like a Switched Loop key. It provides an appearance for 
any line not assigned to a line key for which the extension has access and ringing.

Answering Priority

When multiple calls ring an extension simultaneously, the system services the ringing calls in the follow-
ing order:

1.

Ringing Intercom call

2.

Line or loop key (from lowest to highest)

Operation

Loop keys simplify answering and placing calls.

Using Loop Keys

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To answer a call on a loop key:

1.

Listen for ringing and look for the 

fl

ashing (red) loop key.

2.

Lift the handset.

3.

Press the loop key.

• The loop key will light green after you answer.
• If you have Ringing Line Preference, lifting the handset answers the call.
• If you have Automatic Handsfree, you can press the loop key without 

fi

rst lifting the handset.

To place a call on a loop key:

1.

Lift the handset.

2.

Press the loop key.

• The loop key will light green.

3.

Dial the Line Group code (0-8 for groups 90-98).

Summary of Contents for DSX-40 DEMO KIT





























































































































































































Reviews: