NEC DSX-40 DEMO KIT Page 105 Feature Handbook Download

Page: 105 / 188

Line Group Routing

DSX Feature Handbook

Features

◆

Features

Line Group Routing

Description

With Line Group Routing enabled, an extension user can just press

INTERCOM

and dial 9 to place an out-

side call. Line Group Routing automatically selects the

rst available line in the extension’s programmed

“dial 9” Line Group. This simpli

es placing calls in systems that have a lot of lines for outgoing calls.

Rather than press one of many line keys, the user just dials 9 instead.

Operation

Dial a single code to place a call over the

rst available line in a Line Group.

Using Line Group Routing

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To place a call using Line Group Routing:

Lift the handset and press

INTERCOM

Dial

• If you don’t hear dial tone, Line Group Routing is not enabled.
• If you hear busy tone and your extension has Line Queuing, you can dial 2 to queue for a line to become free.

If you hang up, the system converts the queue to a Line Callback.

Dial your outside number.

Summary of Contents for DSX-40 DEMO KIT





























































































































































































Search results

Summary of Contents for DSX-40 DEMO KIT

Reviews:

Related manuals for DSX-40 DEMO KIT

Brands by name

Popular brands

NEC DSX-40 DEMO KIT, Feature Handbook

Search results

Summary of Contents for DSX-40 DEMO KIT

Reviews:

Related manuals for DSX-40 DEMO KIT

Brands by name

Popular brands