20
3. Projection of Images (Basic Operation)
3-2. Turning your projector on
Preparation:
Supply AC power to the projector head.
Please contact your dealer/distributor to connect the power cable.
NOTE
• Turn off the projector power switch and lamp power switch when supplying or shutting down the AC power to
the projector.
Supplying or shutting down the AC power while the projector power switch and lamp power switch are on will
damage the projector.
• Turning on and off the power involves a two-step operation; the “projector power switch and lamp power
switch” and the “POWER button”.
• Turning power on (See this page)
[1] Turn on the “projector power switch and lamp power switch”.
Your projector is set in a standby state.
[2] If KEY LOCK is on, press the KEY LOCK button for one second or longer.
KEY LOCK is off and buttons on the control panel become operable.
[3] Press the POWER button three seconds or longer.
Your projector is turn on.
• Turning power off (See page 29)
[1] Press the POWER button three seconds or longer.
Your projector is set in a standby state.
[2] When the fan has stopped, turn off the “projector power switch and lamp power switch”.
Your projector is turned off.
1
Remove the lens cap.
2
Turn on the lamp power switch ([1]) then the projector power switch ([2]) on the side of the projector.
A buzzer will ring on the projector. The POWER button will blink green and the Rear STATUS indicator will light orange
(standby state). KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for
30 seconds by default. Buttons on the control panel do not function while KEY LOCK is on. (See page 27)
1
2
3
4
5
LAM
P
MEN
U
ENT
ER
DOU
SER
KEY
LOC
K
EXIT
IMB
6
7
8
PJ POWER
[2]
[1]
LAMP POWER