NEC DB4000 Manual Download Page 21

Page: 21 / 65

Alarm function

Your phone can be used as an alarm so it can alert you at a preset time. If the alarm is set, it will be triggered in all the following

circumstances:

When the phone is on and in standby

During a call

When the phone is ringing

When the phone is powered off

When the phone is charging

When the alarm is triggered, a tone will sound, the backlight will flash and the alarm screen will be displayed.

If the phone is ringing or the ringer is set to off (see page 19), the alarm tone will not sound but the alarm screen will be displayed.

Setting the alarm on

Press

6 2

. The alarm set/off menu will be displayed. The currently selected option will have a

next to it.

Press

. The alarm set menu will be displayed.

If you wish to set the alarm to go off at the time currently displayed, press the

key. The alarm set message will be

displayed momentarily and then the standby screen will be displayed.

If you wish to alter the time, the first hour digit can be altered by pressing either the

key. Alternatively, the

required digit on the keypad can be pressed. If the digit does not need to be altered, press the

key so the second hour digit

can be altered.

Alter the digit if necessary, and then use the

key as appropriate to move to the next value to be altered.

When you have set the clock to the required time and date, press the

key. The alarm set message will be displayed

momentarily and then the standby screen will be displayed.

Setting the alarm off

Press

6 2 2

. The alarm off message will be displayed momentarily and then the standby screen will be displayed.

When the alarm has been set, the time on

the standby screen will be displayed with a

bell icon as follows:

13Ê45

Push any key

Alarm triggered screen

Set alarm

16:38

ÑmoveÒ

Õset

Done

Alarm set screen

Summary of Contents for DB4000


































































Search results

Summary of Contents for DB4000

Reviews:

Related manuals for DB4000

Brands by name

Popular brands

NEC DB4000, Manual

Search results

Summary of Contents for DB4000

Reviews:

Related manuals for DB4000

Brands by name

Popular brands