NEC Barracuda, Service Manual

Page: 68 / 179

Barracuda PDA Maintenance
67
Disassembly
1. Place the PCMCIA Battery Pack Sled upside down.
2. Remove six screws and the cover. (Figure 2-17)
3. Remove three screws and disconnected the Battery cable. (Figure 2-18)
4. Lift up the PCMCIA PCB Board out of the compartment. (Figure 2-19)
Reassembly
1. Replace the PCMCIA PCB Board into the compartment and secured three screws. (Figure 2-18)
2. Replace the cover and secured six screws. (Figure 2-17)
2.3.7 PCMCIA Type
Ⅱ
+ Battery Pack Sled
Figure 2-19 Lift up the PCMCIA
PCB
Figure 2-18 Remove three screws and
disconnected the Battery cable
Figure 2-17 Remove six screws
and the cover.