NEC Barracuda, Service Manual

Page: 65 / 179

Barracuda PDA Maintenance
64
7. Disconnect the LCD Panel cable( ), touch screen cable( ); and LCD backlight control cable( ). (Figure 2-11)
8. Now you can separated the M/B from the LCD Panel. (Figure 2-12)
Reassembly
1. Carefully connected the LCD backlight control cable( ), touch screen cable ( ), and the LCD Panel cable ( ).
(Figure 2-11 )
2. Carefully put the M/B into the PDA compartment well and push the M/B to connected the Switch Board well.
(Figure 2-9,2-10)
3. Secured two screws to fasten down the M/B. (Figure 2-8)
4. Reassembly the Memory PCB Board . (See section 2.3.3 Reassembly)
5. Reassembly the Rear Cover. (See section 2.3.2 Reassembly)
6. Reassembly the Battery Pack. (See section 2.3.1 Reassembly)
Figure 2-11 Disconnect three cables
Figure 2-12
Separated the M/B from
the LCD Panel.