NEC AccuSync LCD72VM User Manual Download Page 74

Page: 74 / 165

4-22

OSD Lock Out

This function locks out all access to OSD controls except volume, brightness and contrast control. When

attempting to activate OSD controls while in the lock out mode, simple OSD menu of volume, brightness and

contrast will appear.

To activate the OSD Lock Out function, enter to OSD LOCK OUT menu, then press “+” key and AUTO key hold

down simultaneously.

To de-activate the OSD Lock Out function, press “+” key and AUTO key hold down simultaneously.

OSD Lock Out (Icon Select)

OSD Lock Out (Adjust)

Resolution Notifier

Activate or de-activate Resolution Notifier function.

Resolution Notifier (Icon select)

Resolution Notifier (adjust)

Resolution Notifier (Message)

Resolution Notifier (adjust)

During Resolution Notifier function operate, Resolution Notifier Icon and slide bar color is changed from

Normal condition.

Summary of Contents for AccuSync LCD72VM






































































































































































Search results

Summary of Contents for AccuSync LCD72VM

Reviews:

Related manuals for AccuSync LCD72VM

Brands by name

Popular brands

NEC AccuSync LCD72VM, User Manual

Search results

Summary of Contents for AccuSync LCD72VM

Reviews:

Related manuals for AccuSync LCD72VM

Brands by name

Popular brands