![background image](http://html.mh-extra.com/html/nec/accusync-lcd72vm/accusync-lcd72vm_user-manual_249473018.webp)
13
Specifications
–continued
Monitor
AccuSync LCD72VM
Notes
Specifications
Monitor
LCD Module
Diagonal:
17.0 inch
Active matrix; thin film transistor (TFT)
Viewable Image Size:
17.0 inch
liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count):
1280 x 1024
pitch; 250cd/m
2
white luminence;
450:1 contrast ratio, typical
Input Signal
Video:
ANALOG 0.7 Vp-p/75 Ohms
Sync:
Separate sync TTL Level (Positive/Negative)
Horizontal sync Positive/Negative
Vertical sync Positive/Negative
Display Colors
Analog input:
16,194,277
Depending on display card used.
Maximum
Left/Right:
70
°
/70
°
(CR>10)
Viewing Angles
Up/Down:
65
°
/60
°
(CR>10)
Synchronization
Horizontal:
31.5 kHz to 81.1 kHz
Automatically
Range
Vertical:
55 Hz to 76 Hz
Automatically
Resolutions Supported
720 x 400*
1
: VGA text
Some systems may not support
640 x 480*
1
at 60 Hz to 75 Hz
all modes listed.
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 864*
1
at 70 Hz
1152 x 870*
1
at 75 Hz
NEC-Mitsubishi Electronics Display cites
1280 x 960*
1
at 60 Hz to 75 Hz recommended resolution at 60 Hz for
1280 x 1024 at 60 Hz to 75 Hz................ optimal display performance.
Active Display Area
Horizontal :
338 mm/13.3 inches
Vertical :
270.3 mm/10.6 inches
Power Supply
100-240 V ~ 50/60 Hz
Speaker Practical Audio Output
1 + 1 Watts
Current Rating
0.
6
- 0.4A/100-120V
Dimensions
375.4 mm (W) x 389 mm (H) x 180 mm (D)
14.8 inches (W) x 15.3 inches (H) x 7.1 inches (D)
Weight
4.7 kg
10.4 lbs
Environmental Considerations
Operating Temperature:
5
°
C to 35
°
C/41
°
F to 95
°
F
Humidity:
30% to 80%
Feet:
0 to 10,000 Feet
Storage Temperature:
-10
°
C to +60
°
C/14
°
F to 140
°
F
Humidity:
10% to 85%
Feet:
0 to 40,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
ASVMmanual070604.p65
7/7/04, 11:10 AM
13