background image

English-5

English

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN 

REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE 

FOLLOWING WHEN YOU POSITION THE MONITOR:

•  For optimum performance, allow 20 minutes for the display to warm up.
•  Adjust the monitor height so that the top of the screen is at or slightly below eye level. 

Your eyes should look slightly downward when viewing the middle of the screen.

•  Position your monitor no closer than 40 cm (15.75 inches) and no further away than 

70 cm (27.56 inches) from your eyes. The optimal distance is 50 cm (19.69 inches).

•  Rest your eyes periodically by focusing on an object at least 20 feet away. Blink often.
•  Position the monitor at a 90° angle to windows and other light sources to minimize glare 

and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen.

•  If reflected light makes it hard for you to see your screen, use an anti-glare filter.
•  Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any 

cleaning solution or glass cleaner!

•  Adjust the monitor’s brightness and contrast controls to enhance readability.
•  Use a document holder placed close to the screen.
•  Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize 

turning your head while you are typing.

•  Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects).
•  Get regular eye checkups.

Ergonomics
To realize the maximum ergonomics benefits, we recommend the following:
•  To avoid eye fatigue, adjust the brightness to a moderate setting. Place a sheet of white paper next to the LCD screen for 

luminance reference.

•  Do not position the Contrast control to its maximum setting.
•  Use the preset Size and Position controls with standard signals.
•  Use the preset Color Setting.
•  Use non-interlaced signals with a vertical refresh rate between 60-75 Hz.
•  Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient 

contrast.

Cleaning the LCD Panel
•  When the LCD is dusty, please gently wipe with a soft cloth.
•  Do not rub the LCD panel with coarse or hard material. 
•  Do not apply pressure to the LCD surface. 
•  Do not use OA cleaner as it will cause deterioration or discoloration to the LCD surface. 

Cleaning the Cabinet
•  Unplug the power supply
•  Gently wipe the cabinet with a soft cloth
•  To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and follow with a dry cloth.

NOTE: 

Many plastics are used on the surface of the cabinet. DO NOT clean with benzene, thinner, alkaline detergent, 
alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder, or insecticide. Do not touch rubber or 
vinyl to the cabinet for a long time. These types of fluids and fabrics can cause the paint to deteriorate, crack or peel.

For more detailed information on setting up a healthy work environment, write to the American National Standard for Human Factors Engineering of Computer 
Workstations - ANSI/HFES 100-2007 - The Human Factors Society, Inc. P.O. Box 1369, Santa Monica, California 90406.

Summary of Contents for AccuSync AS203WMi



















Reviews: