background image

English-16

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s 
top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the latest independent standards from agencies such as 
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).

Disposing of your old NEC product

The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of 
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely 
disposed. To ensure the best recycling of our products, 

NEC DISPLAY SOLUTIONS offers a variety of recycling procedures 

and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.

All required information concerning the disposal of the product and country-specific information on recycling facilities can be 
found on our following websites:

http://www.nec-display-solutions.com/greencompany/ (in Europe),

http://www.nec-display.com (in Japan) or

http://www.necdisplay.com (in USA).

Energy Saving

This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor, 
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.

Mode

Power consumption

LED color

Maximum Operation

21 W

Blue

Normal Operation

14 W Default setting, Audio sleeping

Blue

Energy Saving Mode

0.38 W

Amber

Off Mode

0.38 W

Unlit

WEEE Mark (European Directive 2012/19/EU)

Within the European Union
EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic 
products carrying the mark (left) must be disposed of separately from normal household waste. This includes 
monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your 
NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased 
the product, or if applicable, follow any agreements made between yourself and NEC.

The mark on electrical and electronic products only applies to the current European Union Member States.

Outside the European Union
If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority 
so as to comply with the correct disposal method.

Manufacturer’s Recycling and Energy Information

Summary of Contents for AccuSync AS203WMi



















Reviews: